lemon-mirror:
Home >> Chrysler >> 2006 >> Pacifica Limited, FWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control >> Ignition Coil >> Installation >> 3.5L - Front

3.5L - Front

Fig 1: Ignition Coil Removal/Installation
GC0002367Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the ignition coil. See Fig 1.
  2. Hand tighten coil screws and tighten to N.m 6.7 (60 in. lbs.).
    Fig 2: Ignition Coils
    GC0002366Courtesy of DAIMLERCHRYSLER CORP.
  3. Install and lock the electrical connector to the ignition coil. See Fig 2.
  4. Install the upper intake manifold, (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - INSTALLATION) - 3.5L or (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - INSTALLATION) - 3.8L
  5. Connect the negative battery cable.
· About lemon-mirror