lemon-mirror:
Home >> Chrysler >> 2006 >> Pacifica Limited, FWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control >> Knock Sensor >> Installation >> 3.8L

Knock Sensor: Installation: 3.8L

Fig 1: Knock Sensor - 3.8L
GC0002375Courtesy of DAIMLERCHRYSLER CORP.
  1. Install knock sensor. Tighten knock sensor to 20 N.m (15.2 in. lbs.) torque (1). Over or under tightening effects knock sensor performance, possibly causing improper spark control. 
  2. Route the knock sensor wire in the proper location. See Fig 1.
  3. Connect the electrical connector.
  4. Lower vehicle.
  5. Connect the negative battery cable.
· About lemon-mirror