lemon-mirror:
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System >> Battery HOLDDOWN >> Removal

Battery HOLDDOWN: Removal

  1. Disconnect and isolate the negative battery cable remote terminal from the remote battery post.
  2. Raise and support the vehicle.
  3. Remove the left front wheel and tire assembly from the vehicle.
  4. Remove battery splash shield. Refer to INTERIOR/EXTERIOR for the procedure.
  5. Remove the short bolt from the battery hold down and remove the hold down.
· About lemon-mirror