lemon-mirror:
Home >> Chrysler >> 2007 >> 300 Limited, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System >> Battery System >> Standard Procedure >> Battery Connection Procedure >> Notes

Battery Connection Procedure: Notes

NOTE: This reconnection procedure is to be performed anytime the battery has been disconnected.
Fig 1: Disconnecting/Connecting Battery Cables
GC0012970Courtesy of CHRYSLER LLC
  1. Connect the battery negative cable (2) to the battery post and tighten the clamp nut.
  2. Install the rear compartment floor trim panel.
CAUTION: Once the battery has been connected, review and perform the following information as applicable.
· About lemon-mirror