lemon-mirror:
Home >> Chrysler >> 2008 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Module-Totally Integrated Power >> Removal >> Power Distribution Center

Power Distribution Center

  1. Open hood.
  2. Disconnect and isolate the battery negative cable.
  3. Release the Totally Integrated Power Module (TIPM) cover retaining clips and open the TIPM cover.
  4. Remove the TIPM positive cable retaining nut and remove the cable from the stud.
  5. Depress the four mounting clips to disengage and remove the TIPM housing from its mounting bracket.
  6. Disconnect each of the seven TIPM wire harness connectors.
  7. Remove the TIPM from the vehicle.
· About lemon-mirror