lemon-mirror:
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control System >> Air Injection >> Valve, One Way Check >> Removal >> Removal

Valve, One Way Check: Removal: Removal

Fig 1: Air Injection Check Valve
GC0099922Courtesy of CHRYSLER LLC
WARNING: THE EXHAUST MANIFOLD, AIR INJECTION PIPES, EXHAUST PIPES AND CATALYTIC CONVERTER(S) BECOME VERY HOT DURING ENGINE OPERATION. ALLOW ENGINE TO COOL BEFORE REMOVING AIR INJECTION CHECK VALVE. FAILURE TO ALLOW ENGINE TO COOL BEFORE REMOVAL MAY RESULT IN PERSONAL INJURY CAUSED BY BURNS.
  1. Remove air outlet tube (3) by pushing the ends (2) together, while pulling the air pump outlet tube (3) away from air injection check valve (1).
  2. Remove air injection check valve mounting bolts (4).
  3. Remove air injection check valve (1) and gasket (5) from pipe. Clean old gasket material from air injection pipe.
· About lemon-mirror