lemon-mirror:
Home >> Chrysler >> 2010 >> PT Cruiser >> Repair and Diagnosis >> Electrical >> Body Electrical >> Electronic Control Modules (Service Information) >> Standard Procedure >> SKREEM Programming >> ECM/Skim/WCM Programming

ECM/Skim/WCM Programming

When a ECM and the SKIM are replaced at the same time perform the following steps in order:

  1. Program the new SKIM
  2. Program the new ECM
  3. Replace all ignition keys and program them to the new SKIM.


When an ECM (Bosch) and the SKIM are replaced at the same time perform the following steps in order:

  1. Program the new SKIM
  2. Program the new ECM (Bosch)
  3. Replace all ignition keys and program them to the new SKIM.
· About lemon-mirror