lemon-mirror:
Home >> Chrysler >> 2011 >> 200 S, 2D Convertible >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Heater, Engine Block >> Installation >> 3.6L Engine

3.6L Engine

Fig 1: 3.6L Engine Block Heater & Cylinder Block
GC0144482Courtesy of CHRYSLER LLC
  1. Clean block core hole and heater seat.
  2. Insert heater block (1) assembly.
  3. With block heater seated, tighten screw (2) to 12N.M (106 in.lbs.) to assure a positive seal.
  4. Install power cord plug to block heater (1).
  5. Fill cooling system with coolant to the proper level. Refer to STANDARD PROCEDURE .
    Fig 2: A/C Compressor
    GC0145963Courtesy of CHRYSLER LLC
  6. Install the A/C compressor. Refer to COMPRESSOR, A/C, INSTALLATION .
· About lemon-mirror