lemon-mirror:
Home >> Chrysler >> 2011 >> 200 S, 2D Convertible >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Heater, Engine Block >> Removal >> 3.6L Engine

3.6L Engine

Fig 1: A/C Compressor
GC0145963Courtesy of CHRYSLER LLC
  1. Remove the A/C compressor (1) and position aside. Refer to COMPRESSOR, A/C, REMOVAL .
    Fig 2: 3.6L Engine Block Heater & Cylinder Block
    GC0144482Courtesy of CHRYSLER LLC

    The heater block is located on the driver side towards the front of the engine.

  2. Partially drain coolant from radiator and cylinder block. Refer to STANDARD PROCEDURE .
  3. Disconnect the power cord plug from block heater.
  4. Loosen screw (2) from the heater. Remove block heater assembly (1).
· About lemon-mirror