lemon-mirror:
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> HEATER, Engine Block >> Installation >> 5.7L

HEATER, Engine Block: Installation: 5.7L

Fig 1: Heater, Exhaust And Bolt
GC0143810Courtesy of CHRYSLER LLC
  1. Thoroughly clean the cylinder block core hole and the block heater seat.
  2. Insert the block heater assembly (1) into the block.
  3. With the block heater fully seated, tighten bolt (1) to 2 N.m (17 in. lbs.).
  4. If equipped, install lower engine cover.
  5. Lower vehicle.
· About lemon-mirror