lemon-mirror:
Home >> Chrysler >> 2012 >> 200 S, 2D Convertible >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Module, Occupant Restraint Controller >> Installation >> Occupant Restraint Controller

Occupant Restraint Controller

Fig 1: Removing/Installing ORC
GC0122055Courtesy of CHRYSLER GROUP, LLC
  1. Connect the two ORC connectors (4 and 5) and ensure that the connectors are engaged.
  2. Position ORC (3) (arrow pointing forward) on the console floor bracket and mounting studs (1).
  3. Install the three ORC retaining nuts (2) and tighten to 9 N.m (79.5 in. lbs.).
  4. Install the center console. Refer to HOUSING, SHIFTER, INSTALLATION .
WARNING:

Do not connect the battery negative cable. Refer to DIAGNOSIS AND TESTING . Serious or fatal injury may result if the system test is not performed first.

· About lemon-mirror