lemon-mirror:
Home >> Chrysler >> 2012 >> 200 S, 2D Convertible >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Module, Occupant Restraint Controller >> Removal >> Occupant Restraint Controller

Occupant Restraint Controller

Fig 1: Removing/Installing ORC
GC0122055Courtesy of CHRYSLER GROUP, LLC
  1. Open hood.
  2. Disconnect and isolate the battery negative cable.
    WARNING:

    Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this may result in serious or fatal injury.

  3. Remove the center console. Refer to HOUSING, SHIFTER, REMOVAL .
  4. Remove the ORC mounting nuts (2).
  5. Disconnect the two ORC connectors (4 and 5).
  6. Remove ORC (3) from vehicle.
· About lemon-mirror