lemon-mirror:
Home >> Chrysler >> 2012 >> 300 SRT-8 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Heater, Engine Block >> Removal >> 3.6L

Heater, Engine Block: Removal: 3.6L

Fig 1: 3.6L Engine Block Heater & Cylinder Block
GC0144482Courtesy of CHRYSLER GROUP, LLC
  1. Raise vehicle on hoist.
  2. Remove the A/C compressor. Refer to COMPRESSOR, A/C, REMOVAL .
  3. Detach power cord plug from block heater (1).
  4. Remove block heater attaching screw located below heater terminals.
  5. Remove block heater from cylinder block (2).
· About lemon-mirror