lemon-mirror:
Home >> Chrysler >> 2014 >> 200 S >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Heater, Engine Block >> Installation >> 3.6L

Heater, Engine Block: Installation: 3.6L

Fig 1: 3.6L Engine Block Heater & Cylinder Block
GC0144482Courtesy of CHRYSLER GROUP, LLC
  1. Clean block core hole and heater seat.
  2. Insert heater block (1) assembly.
  3. With block heater seated, tighten screw (2) to 12 N.m (106 in.lbs.) to assure a positive seal.
  4. Install power cord plug to block heater (1).
    Fig 2: A/C Compressor & Fasteners
    GC0145963Courtesy of CHRYSLER GROUP, LLC
  5. Install the A/C compressor. Refer to COMPRESSOR, A/C, INSTALLATION .
· About lemon-mirror