lemon-mirror:
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Column >> Shaft, Intermediate, Lower >> Installation

Shaft, Intermediate, Lower: Installation

GC0162410Courtesy of CHRYSLER GROUP, LLC
CAUTION:

Steering column module is centered to the vehicles steering system. Failure to keep the system and steering column module centered and locked/inhibited from rotating can result in steering column module damage.

NOTE:

A new lower intermediate shaft to upper intermediate shaft bolt (1) must be installed every time the bolt is removed.

  1. Slide the lower intermediate shaft (2) onto the upper intermediate shaft. Install a NEW  lower intermediate shaft to upper intermediate shaft bolt (1) and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
    NOTE:

    A new lower intermediate shaft to steering gear coupling bolt (3) must be installed every time the bolt is removed.

  2. Slide the coupler from the lower intermediate shaft (2) onto the steering gear shaft and install a NEW  lower intermediate shaft to steering gear coupling bolt (3) and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
  3. Remove the support and lower the vehicle.
· About lemon-mirror