Torque Specifications
WARNING: This page is about a different car, the 2025 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Heat Shield Bolts | 9 | 7 | - | |
| Intermediate Shaft Pinch Bolts | 50 | 37 | - | Do NOT reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Outer Tie Rod End Nut (Aluminum Knuckle) | 30 + 180° | 22 + 180° | - | Do NOT reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Outer Tie Rod End Nut (Iron Knuckle) | 25 + 185° | 18 + 185° | - | Do NOT reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Steering Column Bolts | 22 | 16 | - | |
| Steering Column Nuts | 22 | 16 | - | |
| Steering Gear Bolts | 90 | 66 | - | |
| Steering Wheel Nut | 50 | 37 | - | Do NOT reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Tie Rod Jam Nut | 81 | 60 | - |