lemon-mirror:
Home >> Daihatsu >> 1992 >> Charade SX >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Specifications >> Quick-Service >> Service Intervals & Specifications

Service Intervals & Specifications

REPLACEMENT INTERVALS

Component Normal Interval (Miles) (1) Severe Service (Miles)
Air Filter 30,000 24,000
Cam Timing Belt 60,000 60,000
Coolant 30,000 30,000
Fuel Filter
Charade 60,000 30,000
Rocky 30,000 30,000
Oil & Filter
Charade 7500 3000
Rocky 7500 3750
Spark Plugs 30,000 30,000
Transaxle Oil
Charade A/T 45,000 30,000
Charade M/T 22,500 15,000
Transmission Oil
Rocky 30,000 7,000
(1) Severe service is operating vehicle when ambient temperature remains below freezing, repeated short trips or extended low-speed operation such as police, taxi, trailer towing or door-to-door delivery service.
ADJUSTMENT INTERVALS

Application Interval (Miles)
Valve Adjustment 15,000
ALTERNATOR BELT ADJUSTMENT

Application (1) Deflection - In. (mm)
3-Cylinder (2) .200-.276 (5.01-7.01)
4-Cylinder
New Belt (3) .160-.200 (4.00-5.01)
Used Belt .200-.240 (5.01-6.01)
(1) Deflection is with 22 lbs. (10 kg) pressure applied midway between alternator and water pump pulley.
(2) After installing new belt, operate engine for at least 5 minutes and then recheck.
(3) New belt is referred to as a belt that has been in operation less than 5 minutes.
A/C BELT ADJUSTMENT

Application (1) Lbs. (kg)
3-Cylinder
New Belt 2 139-192 (63-87)
Used Belt 88-132 (40-60)
4-Cylinder - Charade
New Belt (2) 121-143 (55-65)
Used Belt 99 (45)
4-Cylinder - Rocky
New Belt (2) 139-192 (63-87)
Used Belt 110-154 (50-70)
(1) Adjust using belt tension gauge.
(2) Belt that has been in operation less than 5 minutes.
POWER STEERING BELT ADJUSTMENT

Application (1) Deflection - In. (mm)
Charade
New Belt (2) .315-.394 (8.00-10.01)
Used Belt .394-.551 (10.01-14.01)
Rocky (3) .354-.433 (9.00-11.00)
(1) Deflection is with 22 lbs. (10 kg) pressure applied midway between pulleys.
(2) New belt is referred to as a belt that has been in operation less than 5 minutes.
(3) After installing new belt, operate engine for at least 5 minutes and then recheck.
· About lemon-mirror