Ignition Keys To Skim

NOTE: A maximum of 8 keys can be learned to each SKIM. Once a key is learned to a SKIM, it (the key) cannot be transferred to another vehicle.

Enter secured access mode by entering the vehicle 4-digit PIN.
If ignition key programming is unsuccessful, the DRBIII® will display one of the following messages:
- Programming Not Attempted
  
  The DRBIII® attempts to read the programmed key status and there are no keys programmed into the SKIM memory.
- Programming Key Failed (Possible Used Key From Wrong Vehicle)
  
  SKIM is unable to program key due to faulty ignition key transponder or an ignition key being programmed to another vehicle.
- 8 Keys Already Learned, Programming Not Done
  
  SKIM transponder ID memory is full.
- Learned Key In Ignition
  
  Ignition key transponder ID is currently programmed in SKIM memory.
Obtain ignition keys to be programmed from customer (8 keys maximum).
Using the DRBIII®, erase all ignition keys by selecting MISCELLANEOUS and ERASE ALL CURRENT IGN. KEYS.
Program all ignition keys.