Overhead Console: Installation
- Position the overhead console in the vehicle.
- Connect the EVIC, CMTC or CT electronic module and the reading/courtesy lamps electrical connector.
- Using your fingertips, grasp the sides of the overhead console and push straight up evenly to engage the two snap clips at the rear of the unit.CAUTION: DO NOT PRESS ON THE SUNGLASS STORAGE BIN DOOR. DAMAGE TO THE DOOR MAY RESULT.
- Install the overhead console retaining screw, located in the front of console. Torque the screw to 1.2 N.m (10 in. lbs.).
- Connect the remote negative battery cable.