Plug, Glow: Installation: Installation

Fig 1: Identifying Glow Plugs

Courtesy of CHRYSLER GROUP, LLC

1. Install glow plugs (1). Tighten glow plugs to 11 N.m (97 in. lbs.).
   Fig 2: Identifying Glow Plug Harness Connectors

   Courtesy of CHRYSLER GROUP, LLC
2. Connect glow plug harness connector (1).
   Fig 3: Lock Tabs & Engine Wire Harness

   Courtesy of CHRYSLER GROUP, LLC
3. Connect the glow plug four way harness connector.
4. Position the wire harness (2) and push down to lock tabs (1).
   Fig 4: Identifying Fuel Rail Pressure Regulator Harness Connector

   Courtesy of CHRYSLER GROUP, LLC
5. Connect the fuel rail pressure sensor harness connector (2).
   Fig 5: Quarter Turn Lock Tabs & Air Inlet Duct

   Courtesy of CHRYSLER GROUP, LLC
6. Install engine cover.
7. Connect negative battery cable.
8. Install air inlet duct (2) and lock the quarter turn lock tabs (1).