lemon-mirror:
Home >> Dodge and Ram >> 2021 >> Durango SRT >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Module, Wireless Charging Pad >> Removal

Module, Wireless Charging Pad: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the Shifter Bezel. Refer to BEZEL, SHIFTER, REMOVAL .
    GC0200439Courtesy of CHRYSLER GROUP, LLC
  3. Remove the fasteners (1) that secure the wireless charging pad bracket (2) to the floor console (3).
  4. Lift up to disengage retainer clips to release the wireless charging pad bracket (2) from the floor console (3).
  5. Disconnect the wire harness connector and remove the wireless charging pad bracket (2).
    GC0200444Courtesy of CHRYSLER GROUP, LLC
  6. Working from the under side of the wireless charging pad bracket (3), remove the fasteners (1) and remove the wireless charging pad module (2).
· About lemon-mirror