lemon-mirror:
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Heater, Engine Block >> Installation

Heater, Engine Block: Installation

GC0144482Courtesy of CHRYSLER GROUP, LLC
  1. Thoroughly clean the cylinder block heater cavity and seat.
  2. Install the engine block heater (1) and tighten the engine block heater bolt (2) to the proper torque specification. Refer to TORQUE SPECIFICATIONS  .
  3. Attach the power cord plug to the engine block heater.
  4. Fill the cooling system to the proper level. Refer to COOLANT SYSTEM AIR EVACUATION  .
  5. Install the generator. Refer to GENERATOR, INSTALLATION .
· About lemon-mirror