1.5L Engine
- Ensure head bolts are properly tightened before adjusting valves. Loosen intake valve adjusting screw completely before adjusting jet valve.
- Ensure engine is at normal operating temperature. Rotate crankshaft clockwise to position cylinder No. 1 on TDC of compression stroke. Adjust jet (if equipped) and intake valves on cylinders No. 1 and 2, and exhaust valves on cylinders No. 1 and 3.
- Rotate crankshaft clockwise 360 degrees to position cylinders No. 4 on TDC of compression stroke. Adjust jet (if equipped) and intake valves on cylinders No. 3 and 4, and exhaust valves on cylinders No. 2 and 4. See VALVE CLEARANCE SPECIFICATIONS table.
VALVE CLEARANCE SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Hot Engine | ||
| Intake | .006 (.15) | |
| Exhaust | .010 (.25) | |
| Cold Engine | ||
| Intake | .003 (.07) | |
| Exhaust | .007 (.17) | |
LIFTER APPLICATION
| Application | Lifter Type |
|---|---|
| 1.5L | Mechanical |
| 1.6L | Hydraulic |