Power Mirror Motor Test
Connect one jumper lead to battery voltage. Connect second jumper lead to chassis ground. Connect other end of jumper leads to appropriate pins in mirror motor connector. See MIRROR MOTOR TEST . See Fig 1 . Motors should move in appropriate direction and stop at end of mirror travel. If mirror does not operate as specified, replace mirror/motor assembly.
MIRROR MOTOR TEST
| Apply 12 Volts To Pin No. (1) | Ground (1) Pin No. | Motor Operation | ||
|---|---|---|---|---|
| 1 | 3 | UP | ||
| 3 | 1 | DOWN | ||
| 3 | 2 | LEFT | ||
| 2 | 3 | RIGHT | ||
|
||||