DRB-II Key Functions
- YES Or Down Arrow & NO Or Up Arrow: Keys will move lines on screen up or down, allowing technician to choose an item or scroll through all selections available.
- F1 & F2 Keys : Keys are used to scroll through sensor displays.
- ATM Key: Key will return technician to previous screen.
- ENTER Key: Allows technician to select a test or display. The flashing arrow must be on the desired display. Pressing the ENTER key in the sensor state will cause display to change from a 3-line display to a 1-line display.
- F3 Key: Key is used to display a help screen. This key may be used at any time.
- Number Keys: Keys are used for choosing a display or test by the number for the test or display.
- READ/HOLD Key: Key is used to freeze any sensor display.
- MODE & ATM Keys: Pressing MODE and ATM key at the same time will cause DRB-II to reset to copyright screen.