lemon-mirror:
Home >> Eagle >> 1996 >> Summit Base >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Removal & Installation >> Speedometer Cable >> Installation

Speedometer Cable: Installation

  1. Install new cable. Insert cable until stopper seats properly in groove on rear of speedometer housing. Pull speedometer cable through firewall grommet until cable marking is visible from engine compartment.
    NOTE: An improperly installed cable can cause fluctuating meter, noise or damaged harness inside instrument panel.
  2. Install adapter onto speedometer cable (if equipped). Install instrument cluster. See INSTRUMENT CLUSTER  . Install cable onto transmission or transaxle. Check for proper operation.
· About lemon-mirror