lemon-mirror:
Home >> Eagle >> 1997 >> Talon Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System >> Testing >> System Is Not Armed

System Is Not Armed

  1. Using a voltmeter, check for battery voltage, at relay box Fuse No. 10, Red wire. If battery voltage exists, check fuse. If fuse is okay, go to next step. If battery voltage does not exist, check fusible link No. 2. If fusible link No. 2 is okay, repair open between relay box fuse Red wire and fusible link. See WIRING DIAGRAM  .
  2. Disconnect ETACS-ECU connector B-47. See Figure . Using a voltmeter, measure voltage between chassis ground and terminal No. 2 at ETACS-ECU connector (Red/Black wire). If battery voltage does not exist, inspect junction block connectors B-47 and B-75 at junction block. Repair as required. If battery voltage does exist, go to next step.
  3. Using an ohmmeter, verify continuity between chassis ground and terminal No. 1 at ETACS-ECU connector. See Figure . If no continuity exists, inspect junction block connectors B-47 and B-49 at junction block. See Figure and Figure . Repair as required. If continuity exists, replace the ETACS-ECU.
· About lemon-mirror