lemon-mirror:
Home >> Ford >> 1989 >> Festiva L >> Repair and Diagnosis >> Engine Performance >> System >> System/Component Tests - CARBURETED >> Fuel System >> Fuel Control >> O2 Sensor

O2 Sensor

  1. Warm engine to normal operating temperature and allow to idle. Connect voltmeter between O2 sensor connector and ground. See Figure .
  2. Run engine at 4000 RPM until voltmeter reads .7 volts. Increase and decrease engine RPM suddenly and several times. When engine RPM is increased, voltmeter should read .5-1.0 volt. When engine RPM is decreased, voltmeter should read 0-.4 volt. Replace defective O2 sensor.
· About lemon-mirror