lemon-mirror:
Home >> Ford >> 1990 >> Probe GL, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Starter - 2.2L >> Bench Testing >> Solenoid

Bench Testing: Solenoid

  1. Check solenoid for wiring damage between terminals "S" and "M". See Fig 1. Using a digital ohmmeter, check for continuity between terminals "S" and "M". Replace solenoid if there is no continuity.
  2. Check for internal wire damage between terminal "S" and solenoid body. Connect one ohmmeter probe to solenoid body and other probe to terminal "S". Replace solenoid if there is no continuity.
  3. Check for ground between terminals "M" and "B". Connect ohmmeter probes between terminals "M" and "B". Replace solenoid if there is continuity.
Fig 1: Solenoid Terminal Identification
G106395Courtesy of FORD MOTOR CO.
· About lemon-mirror