lemon-mirror:
Home >> Ford >> 1995 >> Crown Victoria Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Module Communications Network >> System Tests >> Abs Module >> Communication Link Not Responding

Communication Link Not Responding

If you get the above response when trying to pull ABS codes, it means the NGS is not able to communicate with the anti-lock brake control module. It does not mean the Anti-Lock Brake Control (ABS) module is defective. Check the following items when this message occurs:

  1. Confirm that the ignition in RUN position.
  2. Check the fuse box for blown fuses.
  3. Check the NGS connection to the diagnostic connector.
  4. There is an 8-pin connector on the left front apron (by the power steering fluid reservoir). This connector is used by the assembly plant. Ensure that there is a cap on this connector. If the cap is not in place, power cannot get to the ABS module.

· About lemon-mirror