Component Testing Procedure
WARNING: This page is about a different car, the 2006 Lincoln Navigator and 2006 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
MULTIFUNCTION SWITCH, TURN PORTION COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Turn signal | 4 and 8 4 and 7 |
Left turn | Closed circuit |
| Off | Open circuit | ||
| 4 and 5 4 and 6 |
Right turn | Closed circuit | |
| Off | Open circuit | ||
| Hazard | 1 and 8 | Turn signal switch in neutral, Hazard On | Closed circuit |
| 1 and 7 | |||
| 1 and 6 | |||
| 1 and 5 | |||
| 3 and 7 | Open circuit | ||
| 2 and 6 | |||
| 1 and 8 | Turn signal switch in neutral, Hazard Off | Open circuit | |
| 1 and 7 | |||
| 1 and 6 | |||
| 1 and 5 | |||
| 4 and 8 | |||
| 4 and 7 | |||
| 4 and 6 | |||
| 4 and 5 | |||
| 2 and 6 | Closed circuit | ||
| 3 and 7 |