lemon-mirror:
Home >> Ford >> 2006 >> Freestar Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Driven Sprocket Support >> Assembly

Driven Sprocket Support: Assembly

  1. Make sure that the seals are mated correctly during installation.
    Fig 1: Identifying Seal Ring Mating
    G04661382Courtesy of FORD MOTOR CO.
    2. CAUTION: The seal rings must be installed correctly. Transmission failure could result.
    Fig 2: Locating Teflon® Seals And No. 5 Thrust Washer
    G04661383Courtesy of FORD MOTOR CO.
  2. Install new Teflon® seals and the No. 5 thrust washer.
· About lemon-mirror