lemon-mirror:
Home >> Ford >> 2006 >> Freestar Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Driven Sprocket Support >> Disassembly

Driven Sprocket Support: Disassembly

  1. Remove the Teflon® seal rings and the No. 5 thrust washer.
    Fig 1: Locating Teflon® Seal Rings And No. 5 Thrust Washer
    G04661381Courtesy of FORD MOTOR CO.
  2. Inspect the driven sprocket bearing. If damage is found to the bearing, install a new driven sprocket.
· About lemon-mirror