Torque Converter

A new or remanufactured torque converter must be installed if one or more of the following statements is true:
- A torque converter malfunction has been determined based on complete diagnostic procedures.
- Converter stud or studs, impeller hub or bushing are damaged.
- Torque converter discoloration (due to overheating).
- Evidence of transmission assembly or fluid contamination due to the following transmission or converter failure modes:
  - Major metallic failure.
  - Multiple clutches or clutch plate failures.
  - Sufficient component wear which results in metallic contamination.
  - Internal torque converter contamination present. For additional information refer to Torque Converter Contamination Inspection .