lemon-mirror:
Home >> Ford >> 2009 >> Focus S, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Planetary Assembly >> Disassembly

Planetary Assembly: Disassembly

  1. Inspect the planet internal bearing for damage.
    2. Fig 1: Locating Planet Internal Bearing
    GF0039872Courtesy of FORD MOTOR CO.
  2. Remove the snap ring.
    3. Fig 2: Locating Snap Ring
    GF0039873Courtesy of FORD MOTOR CO.
  3. Remove the rear planet assembly.
    4. Fig 3: Locating Rear Planet Assembly
    GF0039874Courtesy of FORD MOTOR CO.
  4. Remove the thrust bearing.
    5. Fig 4: Locating Thrust Bearing
    GF0039875Courtesy of FORD MOTOR CO.
  5. Remove the forward planet sun gear.
    6. Fig 5: Locating Forward Planet Sun Gear
    GF0039876Courtesy of FORD MOTOR CO.
  6. Remove the thrust bearing.
    7. Fig 6: Locating Thrust Bearing
    GF0039877Courtesy of FORD MOTOR CO.
  7. Remove the forward planet assembly.
    8. Fig 7: Locating Forward Planet Assembly
    GF0039878Courtesy of FORD MOTOR CO.
  8. Inspect the low and reverse ring gear.
    9. Fig 8: Locating Low And Reverse Ring Gear
    GF0039879Courtesy of FORD MOTOR CO.
  9. Remove the top retainer of the One-Way Clutch (OWC).
    10. Fig 9: Locating Top Retainer
    GF0039880Courtesy of FORD MOTOR CO.
  10. Remove the top OWC ring.
    11. Fig 10: Locating Top One-Way Clutch Ring
    GF0039881Courtesy of FORD MOTOR CO.
  11. Remove the low OWC assembly.
    12. Fig 11: Locating Low One-Way Clutch
    GF0039882Courtesy of FORD MOTOR CO.
  12. Remove the lower one-way ring.
    13. Fig 12: Locating Lower One-Way Ring
    GF0039883Courtesy of FORD MOTOR CO.
· About lemon-mirror