Powertrain Drivetrain Mount Neutralizing

Adjustment

NOTE: Refer to the appropriate service information and procedure for special instructions on loosening and tightening mount fasteners.

1.

Refer to: Jacking and Lifting - Overview

2.

Loosen, but do not remove, the powertrain/drivetrain mount fasteners.

3.

Lower the vehicle.

4.

NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

Start the vehicle and move it in forward 0.6 m (1.97 ft) - 1.2 m (3.94 ft). Then move the vehicle in reverse the same distance.

5.

Raise and support the vehicle.

6.

Tighten the powertrain/drivetrain mount fasteners.

7.

Lower the vehicle.

8.

Test the system for normal operation.