Adaptive Learning Drive Cycle

Adaptive Learning Drive Cycle 

Configuration 

• 1.
  
  Using the scan tool, select Powertrain under the Toolbox icon, select Transmission, then select Clear Transmission Adaptive Tables.

• 2.
  
  Bring the transmission to normal operating temperature.

• 3.
  
  With the engine running and the brake applied, select the gears in the following order, pausing in each gear for 4 seconds: N, R, N, D, R, D, N. Repeat this pattern 2 times. If any engagements feel soft or harsh, repeat this procedure.

• 4.
  
  Drive the vehicle and accelerate at a moderate throttle so that the upshifts occur at 2, 000 rpm up to 80 km/h (50 mph) and brake moderately to a stop. Repeat this pattern 2 times.

• 5.
  
  Drive the vehicle and accelerate at a moderate throttle so the upshifts occur at 3, 000 rpm up to 80 km/h (50 mph) and brake moderately to a stop. Repeat this pattern 2 times.

• 6.
  
  With the engine running and the brake applied, select the gears in the following order, pausing in each gear for 4 seconds: N, R, N, D, R, D, N. Repeat this pattern 2 times.