Power Door Locks: Description

The electric door lock system consists of a lock actuator assembly at each door, conventional switches and a relay. All doors lock and unlock manually or from the door control switches. All components are serviced as complete assemblies. The motor is a permanent magnet, 12 volt reversible type that is protected by an internal circuit breaker which may require 1 to 3 minutes to reset. A 30 ampere circuit breaker also protects the door lock feed circuit to relay wiring. The relay assembly is a double-pole, double-throw relay externally grounded to body beneath the right side of the instrument panel behind glove compartment. The control switch is a three-pin rocker type mounted on door armrests. The feed circuit to the lock switches is protected by a 20 ampere fuse.