Windows Operate Okay
- Turn ignition on. Connect test light between inoperative window motor connector terminals "A" (Brown wire) and "B" (Dark Blue wire). Operate window switch between UP and DOWN positions. If test light does not illuminate in both positions, go to next step. If test light illuminates in both directions, check inoperative window motor for poor connection. If connection is okay, replace window motor.
- Connect test light between inoperative window switch connector left rear and right rear terminals "A" (Dark Green wire) and "D" (Purple wire), or between window switch connector right front terminals "J" (Light Blue wire) and "L" (Tan wire). Operate inoperative window switch (at master switch) between UP and DOWN positions. If test light illuminates in both positions, go to next step. If test light does not illuminate in both positions, go to step 4).
- Connect test light between right front inoperative window switch connector terminals "G" (Dark Blue wire) and "K" (Brown wire), or between left rear and right rear terminals "F" (Brown wire) and "C" (Dark Blue wire). Operate inoperative window switch between UP and DOWN positions. If test light illuminates in both positions, repair open circuit in Dark Blue or Brown wires. If test light does not illuminate in both positions, check inoperative window switch for a poor connection. If connection is okay, replace inoperative window switch.
- Connect a test light between master window switch connectors. For right front, connect test light between terminals "B" (Light Blue wire) and "D" (Tan wire). For left rear, connect test light between terminals "G" (Dark Green wire) and "K" (Purple wire). For right rear, connect test light between terminals "H" (Light Green wire) and "H" (Purple wire). If test light illuminates in both directions, repair loose connection or open circuit in appropriate wiring. If test light does not illuminate in both directions, replace master window switch.