Transmitter Programming
- Ground terminal "G" (Black/White wire) of Data Link Connector (DLC) located under lower left side of instrument panel. Receiver will respond by locking and unlocking all doors within 2 seconds. Press any button of first transmitter to be programmed. Control module will respond by locking/unlocking all doors and activating liftgate release (if equipped).
- Press any button of second transmitter to be programmed (if equipped). Control module will again respond by locking/unlocking all doors and activating liftgate release (if equipped). Remove ground from DLC terminal "G". Transmitter operation can be verified by locking and unlocking doors and automatically activating liftgate release.