Both Power Mirrors Do Not Operate
- Disconnect power mirror switch connector. Connect test light between power mirror switch harness terminal "H" (Orange wire) and ground. If test light glows, go to next step. If test light does not glow, repair open in Orange wire from power mirror switch connector to fuse block.
- Connect test light between power mirror switch harness terminals "H" (Orange wire) and "A" (Black wire). If test light does not glow, repair open in Black wire from power mirror switch connector to convenience center connector. If test light glows, check for open in Red wire between each power mirror and power mirror switch. If circuit is okay, replace power mirror switch.