Engine Controls - Tests W/Codes - 6.5L Diesel: Introduction

The 6.5L Diesel Electronic Control (DEC) system electronically controls EGR system operation, Torque Converter Clutch (TCC) engagement, fuel control and fuel injection timing, and is controlled by the Powertrain Control Module (PCM).

The PCM monitors a number of transmission functions and uses the data to control shift solenoids, TCC, and pressure control solenoid to regulate upshift pattern, downshift pattern and line pressure (shift quality).

Most engine/transmission control problems are NOT computer related, but result from mechanical breakdowns, poor electrical connections, or damaged vacuum hoses. Before condemning the computer system, carefully perform visual and mechanical inspections covered in BASIC TESTING article. Failure to perform these inspections can result in lost diagnostic time.

If no faults were found while performing visual and mechanical inspections in BASIC TESTING article, go to DIAGNOSTIC PROCEDURE under SELF-DIAGNOSTIC SYSTEM. If no diagnostic trouble codes are present and driveability problems exist, proceed to TESTS W/O CODES article for diagnosis by symptom (i.e., ROUGH IDLE, NO START, etc.). If only intermittent codes are present, see INTERMITTENTS in TESTS W/O CODES article.