Installation Procedure
- Install a stationary window into the opening. Refer to Urethane Adhesive Installation Of Stationary Windows .
- Install the window side reveal moldings to the vehicle.
- Install the screws to the left and the right sides of the window side reveal moldings. Tighten the screws to 2 N.m (18 lb in).
- Install the front door sealing weatherstrips (1) to the retainer (2).
- Install the cowl air inlet grille panel.
- Install the window wiper arms.
- Install the antenna mast, if equipped.
- Install the rearview mirror.
- Close the hood.
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.