lemon-mirror:
Home >> GMC >> 2003 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Instrument Panel Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer toSIR Caution in Cautions and Notices.
    CAUTION: Refer toSIR Inflator Module Handling and Storage Caution in Cautions and Notices.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 5 .
  2. Remove upper I/P trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Upper in Instrument Panel, Gages and Console.
  3. Remove the I/P inflator module connector from the I/P structure.
  4. Remove the inflatable restraint I/P module nuts.
  5. Remove the inflatable restraint I/P module.
    Fig 1: Inflatable Restraint I/P Module
    GM915018Courtesy of GENERAL MOTORS CORP.
  6. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping .
· About lemon-mirror