Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Exhaust System Front Gasket |
| Exhaust System Intermediate Gasket |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter Clamp | 15 N.m (11 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter Brace Bracket Bolt | 22 N.m (16 lb ft) |
| Catalytic Converter Brace Bracket Nut | 22 N.m (16 lb ft) |
| Catalytic Converter Brace Bracket Nut@Transmission Housing Stud | 58 N.m (43 lb ft) |
| Catalytic Converter Heat Shield Bolt | 10 N.m (89 lb in) |
| Catalytic Converter Nut | 22 N.m (16 lb ft) |
| Exhaust Front Pipe Nut | 25 N.m (18 lb ft) |
| Exhaust Front Underbody Heat Shield Retainer | 1.5 N.m (13 lb in) |
| Exhaust Intermediate Underbody Heat Shield Retainer | 1.5 N.m (13 lb in) |
| Exhaust Muffler Heat Shield Retainer | 1.5 N.m (13 lb in) |
| Exhaust Rear Muffler Rear Hanger Bolt | 22 N.m (16 lb ft) |
| Exhaust Muffler Insulator Bolt | 22 N.m (16 lb ft) |