Removal Procedure
- Using the scan tool, deflate the automatic level control air supply reservoir.
With the aid of an assistant, remove the fascia. (1) Rear Bumper Fascia Removal and Installation (GQH / GQI / GQO) , or Rear Bumper Fascia Removal and Installation (GQ2 / GQB / GQC)
Remove the rear cradle, and electric drive transmission module assembly (1) from the vehicle. Rear Suspension Cradle Removal and Installation (AXK and K28) , or Rear Suspension Cradle Removal and Installation (AXK and K2O)
Remove the air intake line (1) from the body grommet.
- Remove the air line retainer clips as necessary.
Remove the 2 air line retaining clips (1).
- Disconnect the electrical connectors from the air suspension controller as necessary.
- Remove the 5 air line nuts (3) from the air suspension controller.
Automatic Level Control Air Compressor Bolt (1) - Remove
- Automatic Level Control Air Compressor Nut (2) - Remove [2x]
Automatic Level Control Module (1) - Remove
Service mode will be automatically enabled when the ride height sensors detect the vehicle has been lifted off the ground. Service mode will automatically be disabled when the vehicle reaches 16 km/h (10 MPH).
The air lines and air suspension controller are color coded to aid with installation.