Repair Procedures: Installation
CAUTION:
Do not confuse the ignition coil #2 with #4 connections.
Doing so may cause the engine to stall due to incomplete ignition. And, since unburned fuel flows into the catalyst, this can overheat and damage the catalyst.
A yellow tag (A) is attached to ignition coil #4. Use this tag for reference when connecting the ignition coils.
Doing so may cause the engine to stall due to incomplete ignition. And, since unburned fuel flows into the catalyst, this can overheat and damage the catalyst.
A yellow tag (A) is attached to ignition coil #4. Use this tag for reference when connecting the ignition coils.
- Install in the reverse order of removal.
Ignition coil installation bolts:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)