lemon-mirror:
Home >> Genesis >> 2017 >> G80 5.0 Ultimate >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Trunk Module >> Power Trunk Module Drive Unit >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Remove the left trunk trim.

    (Refer to TRUNK TRIM Body )

  3. Remove the motor connector.
  4. Connect the motor terminals directly to battery voltage (12V) and check that the motor operates smoothly. Next, reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor.
G11342491Courtesy of
G11342492Courtesy of
· About lemon-mirror