lemon-mirror:
Home >> Genesis >> 2017 >> G80 5.0 Ultimate >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Inspector Drive Box >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battert cable.
  2. Remove the ECM & TCM & IDB cover (A).
    G11336622
  3. Disconnect the ECM connector (A), and then disconnect the IDB connector (B) and the TCM connector (C).
    G11336623
  4. Remove the ECM & TCM & IDB bracket installation bolts (A) and nut (B).
    G11336624
  5. After removing the installation bolts (A), remove the TCM (B) from the bracket.
    G11336625
  6. After removing the installation nuts (A), remove the IDB (B) from the bracket.
G11336626