lemon-mirror:
Home >> Genesis >> 2018 >> G80 3.8, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then vertically remove the sensor from the transaxle housing.
    G12657616Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror